Die-cutting machine with hot foil stamping Guowang C80Y

Die-cutting machine with hot foil stamping C80Y

This machine combines die-cutting and hot foil stamping, allowing wide use in the printing industry and efficient, precise processing of printed products. It handles foil stamping, Braille and holographic patterns, and stamping can be applied to various materials. High-tech die-cutting ensures high efficiency in offset lamination and folding carton production, and this die-cutter can truly improve your competitive advantage. The unique die-cutting system offers print registration and significantly reduces feeding-related downtime. During production, it switches quickly between stamping and die-cutting without long downtime. The machine has a special system for efficient production data management and a 19″ high-resolution touch screen. All settings and functions can be conveniently controlled by touch, and the control system is simple and clear.

Interested in this machine? Write to us and we will prepare an offer.

Send an inquiry

High-quality feeder with 4 suckers for lifting paper and 4 suckers for forwarding paper to ensure fast and stable sheet feeding. The height and angle of the suckers are easily adjustable so that the sheets are delivered straight.
Mechanical double-sheet control, a late-sheet detection device and an adjustable air blower ensure reliable and precise sheet transfer.
Becker compressor.
Motorised lateral pile shift for precise feeding.
A perfectly formed sheet pile can be built on pallets that move on rails and allow pre-piling. This creates an important precondition for trouble-free production, and the operator can move the prepared pile precisely and comfortably into the feeder. (Max. pile height up to 1300 mm).
The single-position engagement of the pneumatically controlled mechanical clutch ensures that after every restart the first sheet is always precisely delivered to the front lays for easy, quick and material-saving make-ready.
The side lays can be switched between pull and push mode on both sides of the machine simply by turning a pin, without mounting or dismounting any parts. This ensures flexibility in processing a wide range of materials, regardless of whether the register marks are on the left or right side of the sheet.
The side and front lays are equipped with precise optical sensors that detect black colour and plastic sheets. Sensor sensitivity is adjustable.
Optical sensors with an automatic stop system on the feed table optimise the monitoring system for comprehensive quality control across the entire sheet width and in the event of a sheet jam.
The control panel on the feeder, used for easier control of the feeding process, has an LED display.
Separate drive control for the main pile and auxiliary pile.
PLC and electronic cam for timing control.
A foreign object protection device can prevent machine damage.
Swiss Rapplon feeder conveyor belt with adjustable speed.

A pneumatic locking system makes it easier to lock and release the cutting die and cutting plate.
Pneumatic lifting cutting plate for easier insertion and removal.
A centring system on the cutting chase with diagonal fine adjustment ensures precise registration, allowing quick job changes.
Precise positioning of the cutting die is controlled by a precise optical sensor with an automatic check and locking device.
Cutting die turning device.
Siemens main motor controlled by a Schneider inverter.
Fine adjustment of cutting force (pressure accuracy max. 0.01 mm, max. cutting force up to 250 tonnes) is provided by a servo motor with worm gear, controlled via a 15-inch touch screen.
The crankshaft is made of chrome steel (40Cr).
The machine frame and ram are made of ductile cast iron (HT300)
A set of gripper bars made of light and durable aluminium alloy with an ultra-hard anodised surface ensures precise and consistent paper registration.
The high-quality gripper bar from Japan offers a long service life.
The perfectly designed gripper bar needs no compensation spacer to ensure precise paper registration.
High-quality pre-stretched Renold chain from England ensures stability and accuracy for long-run jobs.
High-pressure gripper bar registration system ensuring precise positioning.
An overload protection device with torque limiter ensures a high level of safety for operator and machine.
Automatic lubrication and cooling system for the main drive and automatic main chain lubrication.

Independently controlled programmable foil pull rollers (3 sets longitudinal and 2 sets transverse) driven by YASKAWA servo motors.
Longitudinal full-format foil loading system for stamping in 2 directions simultaneously greatly helps save foil and shortens foil change time.
12 separately controlled heating zones using an intubation heating system with a temperature tolerance of ±1 °C.
1 set of ductile iron honeycomb chase and locking device for die-cutting.
Dwell device for stamping large areas.
2-way separating blower.
Brush system for removing foil waste from the side of the machine, where it can be collected and disposed of.
Optical sensors for detecting broken foil.
Hologram (optional)

Electronic detectors, microswitches and photoelectric sensors throughout the machine are controlled by a programmable logic controller (PLC).
Electronic switching cam for encoder switching.
All main operations can be controlled via 15- and 10.4-inch touch monitors.
PILZ safety relays as standard ensure a high safety standard.
The internal locking switch meets all CE requirements.
Electrical components including Moeller, Omron, Schneider relays, AC contactors and air circuit breakers ensure stability for long-run jobs.
Automatic error display and automatic diagnostics.

An adjustable AC-motor-driven brake brush helps take paper from the grippers and stack it at higher speed with perfect pile alignment.
Photoelectric device to prevent excessive rising or lowering of the paper pile.
Sheets in the pile can be counted by an optical sensor (standard), and this unit can be integrated with a tape inserter for placing paper markers in the pile (optional), making it easier to remove unprinted sheets and pack.
The entire machine can be set up via a 10.4-inch touch monitor at the rear.
An auxiliary conveyor grid makes it easier to configure the machine as a non-stop delivery.

Die-cutting machine with hot foil stamping Guowang C80Y – photo 1

Die-cutting machine with hot foil stamping Guowang C80Y – photo 2

Die-cutting machine with hot foil stamping Guowang C80Y – photo 3

Die-cutting machine with hot foil stamping Guowang C80Y – photo 4

Maximum sheet size	800 x 600 mm
Minimum sheet size	300 x 260 mm
Maximum die-cutting size	785 x 585 mm
Maximum stamping size	760 x 580 mm
Adjustable gripper margin	7 – 17 mm
Maximum working pressure	250 t
Grammage range	90—2000 g/m2 board, 0.1—3 mm
Maximum die-cutting speed	7,500 sheets/h
Maximum stamping speed	6,500 sheets/h
Maximum holographic stamping speed	5,500 sheets/h
Maximum board thickness	4 mm, E, B
Number of heating zones	20
Maximum feeder pile height	1 300 mm
Maximum delivery pile height	1 050 mm
Main motor power	7,5 kW
Total power input	35 kW
Weight	14 t
Dimensions	5 510 x 3 760 x 2 350 mm

Home › Printing machines › Die-cutting machines with hot foil stamping › Die-cutting machine with hot foil stamping Guowang C80Y

Die-cutting machine with hot foil stamping Guowang C80Y

Die-cutting machine with hot foil stamping C80Y

You might also be interested in