Creasing and cutting machine GeminiCut Air 331BSC

The machine is operated via a touch screen with a user-friendly interface.

Interested in this machine? Write to us and we will prepare an offer.

The feed table holds a paper stack up to 50 mm high.
An adjustable side guide allows papers of different widths to be loaded, and the table tilt is also adjustable.
Adjustable air flow height and sheet separation allow paper of different thicknesses to be processed.
Colour-coded indicators allow operators to switch quickly and easily between preset standard templates.
The 331BSC software and hardware include a set of icons and functions that allow the user to easily compensate for image shift, stretch or shrinkage with just a few clicks.
To collect more cards without stopping the machine, an optional output conveyor can be mounted on the card cutter outlet. Its capacity is sufficient for cards of various sizes processed from a full stack of sheets on the feed table.
Two slots are available for interchangeable tools.
A scoring bar for top and bottom scoring allows both operations in a single pass. This bar can be swapped for a perforation bar in seconds, so a job requiring one score and one perforation can also be completed in one pass.

Model	GeminiCut Air 331BSC
Infeed size	210 × 210 mm – 330 × 650 mm
Outfeed size	55 × 48 mm – 330 × 650 mm
Paper weight	150–350 gsm
Paper type	Coated (chromo), laminated, UV coated, etc.
Crease width	1.0 mm
Perforation	12 TPI
Crease/perf in one pass	Up to 32 times in one pass
Shrink/stretch compensation	Feeding direction
Slitting	4 slitters, 2 side trimmers; 2 gutter slitters with fixed 8 mm (3/8") gap
Cutting	Up to 32 times in one pass
Accuracy	±0.2 mm
Gutter slit	8 mm (3/8"), fixed
Gutter cut	0 or 3–15 mm, programmable
Feeding type	Top air suction feed
Feeder capacity	50 mm
Control panel	Touch screen
Power	Either 220 V or 110 V, 50/60 Hz
Dimensions	1720 × 580 × 1160 mm

You might also be interested in